Malcom reflow profiler system, RCX Series is a modular system for measuring different functions of the reflow oven.
Electronics Manufacturing
Image
Products
Consumer Electronics Solutions
Explore our advanced products designed to enhance manufacturing efficiency and quality in the consumer electronics industry, offering reliable performance for a wide range of applications.
Manufactured by Nippon Nozzle, a global leader in spinneret production, these Wet Spinnerets are renowned for their exceptional precision and...
The DH-35A Portable Dissolved Hydrogen Meter is a highly sensitive and accurate device designed to measure trace amounts of dissolved...
The ODL-1600A is an advanced oil film detector designed to monitor water surfaces for the presence of oil slicks using...
The MAC-1600 is an advanced field-installation pH meter designed to automate electrode cleaning and two-point calibration using JIS standard solutions...
The PCAS-100 which is included in the PCAS-1000 series PCA stress measurement set is a specially designed software which enables...
Kyowa’s PCAS-1000 series PCA stress measurement set comes with components as below, PCAS-100 software: PCA Stress Measuring Software PCD-400A: sensor...
Malcom’s new flagship viscometer replaces the PCU-205 as the industry standard for testing solder paste viscosity. Updates featured in this...
Optional Parts for MrDry Dehumidifier Cabinets McDry Electronic Drying Storage Cabinets are utilized worldwide for storage of automotive parts such...
28ET Application: For general mounting factory Dehumidifier Cabinet Key Features Door opening/closing frequency: Once every 20-40 minutes Compliant to ESD-IEC61340-5-1...
Key Features Eliminates waste and saves money Completely removes solder paste using ultrasonic vibration Cleans wiper rolls in about 20...
The new UC-250M-CV takes all the features of the UC-250M, and adds a dual cleaning feature using a combination of...
Features: UC-250 Series, from Citizen's established precision and machining technology, is specially designed for SMT line use. Able to clean...
Wetting Balance Tester for through-hole component leads. The Malcom SWB-2 Wetting Balance Tester is an automated solution for measuring the...
The Malcom SP-2 Wetting Tester helps to test the wettability of solder paste and components while actually simulating the SMT...
The Malcom FCX-50 Solder Profiler provides excellent temperature profile and dip time analysis. The FCX-50 is for single wave and...
The Malcom DS-11S Dip Tester for Selective Soldering measurement system. Attain vital soldering performance information with just one device. Features...
The Malcom DS-11 Dip Tester dual wave measurement system. Attain vital soldering performance information with just one device Features &...
For fast and easy spot viscosity readings, look no further than the Malcom PCU-02V. This small and compact viscometer uses...
The Malcom PC-11 is a simple table-top viscometer that has the flexibility of changing sensor rotors to accommodate a wide...
The VDM-3 video capture system uses the built-in viewing windows built into the Malcom reflow simulators to capture video of...
The RDT-250C is a table-top small form factor oven that will accommodate PCBs up to 250mm X 330mm. Manual and...
The SRS-1C is a table-top small form factor oven that will accommodate SMT parts and small PCBs up to 70mm...
Unlike hand mixing, the Malcom SPS Solder Paste Mixer is a non contaminating mixer which utilizes pseudo planetary motion to...
The Malcom SPS-3000 Solder Paste Mixer is a addition to the SPS line. This new version adds a number of...
Application: For general mounting factory Electronic Dry Cabinet Key Features Door opening/closing frequency: Once every 20-40 minutes Compliant to ESD-IEC61340-5-1...
Large Depth Ultra Low Humidity Dry Cabinet McDry Ultra Low Humidity Dry Cabinets are utilized worldwide for storage of automotive...
Large Depth Moisture Barrier Cabinets McDry humidity storage cabinet maintains ultra-low humidity levels under the recommended indefinite safe floor life...
McDry dehumidifying dry cabinets are utilized worldwide for storage of automotive parts such as engine components, bearings, springs, ball sensors...
McDry electronic dry cabinet maintains ultra-low humidity levels under the recommended indefinite safe floor life guideline of dry storage at...
McDry humidity controlled storage box maintain ultra-low humidity levels under the recommended indefinite safe floor life guideline of dry storage...
McDry Humidity Control Dry Box are utilized worldwide for storage of automotive parts such as engine components, bearings, springs, ball...
McDry dehumidifying dry cabinets are utilized worldwide for storage of automotive parts such as engine components, bearings, springs, ball sensors...
McDry ultra low humidity dry cabinets are utilized worldwide for storage of automotive parts such as engine components, bearings, springs...
McDry humidity storage cabinet maintains ultra-low humidity levels under the recommended indefinite safe floor life guideline of dry storage at...
McDry dehumidifying dry cabinet maintains ultra-low humidity levels under the recommended indefinite safe floor life guideline of dry storage at...
McDry desiccant dry box maintains ultra-low humidity levels under the recommended indefinite safe floor life guideline of dry storage at...
Key Features New heat insulation design with energy saving effect N2 consumption largely reduced Air conditioning load largely reduced New...
Key Features Solution for stress free depanelization Fixture-based highly efficient dust vacuum system Clean and precise depanelization for densely populated...
Key Features Solution for stress free depanelization Fixture-based highly efficient dust vacuum system Clean and precise depanelization for densely populated...
A PCB Router Machine is often used in manufacturing to separate PCB's with a programmable controller. PCB Router Separator typically...
Characteristics Eightech’s new RV Series vacuum oven has pushed the limits of optimal cost/performance. Significantly decreased the void With combine...
Key Features Multipoint Spray Fluxer Maximum PCB size: 260mm x 340mm Maximum coating area: 240mm x 320mm Maximum number of...
Our Solutions
Highly effective solutions for all industries.
Powerful and Effective Solutions for Every Industry. Tailored to Meet the Unique Demands of Your Sector, Our Products Drive Innovation, Efficiency, and Success Across All Fields.
