For fast and easy spot viscosity readings, look no further than the Malcom PCU-02V. This small and compact viscometer uses an extremely small sample size for quick temperature control, and minimal material waste. The viscosity measurement takes less than 3 minutes. The PCU-02V excels when you need a quick spot check to make sure your material is ready or within spec for use.
Features & Benefits:
- Patented spiral-pump sensor provides quick, easy, repeatable measurements.
- Elimination of misprints due to incorrect paste conditions.
- Continuous measurement of newtonian and non-newtonian fluids with constant shear rate and shear time.
- Measure the Viscosity &Thixotropy using only a 0.2cc sample of Solder Paste.
- Fully automatic temperature control of sample.
- The measurement settings, date & save functions are easily accessible with the software.
- PCU-02V is a optimum device for Expensive Materials Testing & Analysis, obtaining the Viscosity Characteristics with 0.2cc, Small Amount of sample.
|Sensor||Malcom spiral-pump type|
|Measurement Range||20~300Pa.s (20~50Pa.s 20rpm ・50~300Pa・s 10rpm)|
|Shear Rate (sec-1)||0.6×Ns-1|
|Measurement Accuracy||± 5%|
|Speed Accuracy||± 2%|
|Temperature||0~50℃ Resolution: 0.1℃ Accuracy: ±0.5℃|
|Temp. Control Range||15～40℃ (when the room temp. is 25℃) Built-in thermostat|
|Digital Display||Viscosity ・ Temp. ・ rpm|
|Digital Output||Via USB|
|Recorder Output||Viscosity: 1mV／Pa・s Temp: 10mV／℃|
JIS Z8809 Standard Fluid for Viscosity Calibration or
|Power Supply||AC100V～240V 50／60Hz 100VA|
|Outer Dimensions||315(D) x 335(W) x 376(H) mm|
|Weight||Approx. 8kg (including sensor part, approx. 1kg)|