A PCB Router Machine is often used in manufacturing to separate PCB's with a programmable controller. PCB Router Separator typically contains a high speed spindle with a one- touch switch for program switch and jig switch change. The machine is usually imported with ten jigs or more and one or more router bits. The machine usually contains the manual guide that comes with it, if required.
Key Features
- Advanced image processing software offers easy programming and CAD base offline programming
- Automatic alignment compensation with fiducial marks
- Automatic program change with QR code
- Extended bit life with 5 stage bit position control
- AC 115V, operation no compressed necessary
Specifications
Note: The specifications are subject to minor change for improvement of the product.
| Max PCB size | 250mmx350mm (9.8"x13.7") |
| Max PCB Thickness | Up to *6.0mm |
| Max Component Height | 23mm top side, 50mm bottom side |
| Router bit diameter | 0.8mm - 3.0mm |
| Max Router bit traveling speed | 500mm/sec |
| Max Router bit cutting speed | 50mm/sec |
| Max Spindle speed | 50,000rpm (option 60,000rpm) |
| Mechanical repeatability | ±0.02mm |
| X / Y / Z control | Stepping motor with servo control |
| Power & Pneumatic requirement | AC115V 60Hz Only (No air required) |
| Equipment size & Wieght | 800mm(W) x 700mm(D) x 510mm(H) 70KG |
| Dust Collector (VNA-15) size | 650mm(W)x400mm(D) x1,390mm(H) 90Kg |
* Optional Setting
