PRODUCTS
Explore our Products
Discover a comprehensive selection of cutting-edge equipment and solutions tailored to meet diverse industry needs. Browse our featured products or filter by industry, category, or manufacturer to find the perfect fit for your business.
Featured Products
28ET Application: For general mounting factory Dehumidifier Cabinet Key Features Door opening/closing frequency: Once every 20-40 minutes Compliant to ESD-IEC61340-5-1...
AB-2012 FPS Abrasion Tester can perform tests by controlling tangential force between the test piece and the abrasive wheel in...
The SAT-500 Salt Analyzer from DKK-TOA Corporation is designed for precise and efficient salinity (chloride concentration) measurements, making it an...
Laboratory Testing Equipment
RTM Friction Tester (MODEL FR-7225)
Constant Stress/Strain Fatigue Tester (Series FT-3130)
FPS Abrasion Tester Ueshima UNICORN II Tensile Tester Model TS-2633/TS-2643 Viscoelasticity Analyzer (DMA) 
KES-SESRU Roughness/Friction Tester KES-QM Warm/Cool Feeling Measurement Tester NDG5 Puncture Strength Tester Electronics MFG Equipment
Malcom Viscometers: PCU-285
Malcom Paste Mixers: SPS-3000 Solder Paste Mixer
Malcom Paste Mixers: SPS Series Solder Paste Mixer
Malcom Reflow Simulators: SRS-1C
Malcom Reflow Simulators: RDT-250C
Malcom Reflow Simulators: VDM-3 Video Capture System
Malcom Viscometers: PC-11 Table Top Viscometer
Malcom Viscometers: PCU-02V Small Sample
Malcom Wave & Selective Soldering: DS-11 Dip Tester Malcom Wave & Selective Soldering: DS-11S Dip Tester for Selective Solder
Rubber & Tire Testing
Outline RTM Friction Tester enables to evaluate friction characteristics of tire tread compound in Dry, Wet and Ice conditions. Friction...
FT-3130 series constant stress/strain fatigue tester counts number of strokes until the test piece is broken.A test is done for...
AB-2012 FPS Abrasion Tester can perform tests by controlling tangential force between the test piece and the abrasive wheel in...
Ueshima UNICORN II Tensile Tester Model TS-2633/TS-2643
VR-7130 Automatic DMA was designed to eliminate possible causes of measurement errors and variability by adopting the full automatic system...
Textile Testing Systems
The KES-SESRU Roughness/Friction Tester is a state-of-the-art instrument designed to objectively quantify the surface texture and frictional properties of materials...
The KES-QM Warm/Cool Feeling Measurement Tester is an advanced instrument designed to objectively measure the thermal sensation experienced when the...
The NDG5 Puncture Strength Tester is a precision instrument designed to measure the force required to pierce or rupture materials...
Process Control Equipment
Malcom’s new flagship viscometer replaces the PCU-205 as the industry standard for testing solder paste viscosity. Updates featured in this...
The Malcom SPS-3000 Solder Paste Mixer is a addition to the SPS line. This new version adds a number of...
Unlike hand mixing, the Malcom SPS Solder Paste Mixer is a non contaminating mixer which utilizes pseudo planetary motion to...
The SRS-1C is a table-top small form factor oven that will accommodate SMT parts and small PCBs up to 70mm...
The RDT-250C is a table-top small form factor oven that will accommodate PCBs up to 250mm X 330mm. Manual and...
The VDM-3 video capture system uses the built-in viewing windows built into the Malcom reflow simulators to capture video of...
The Malcom PC-11 is a simple table-top viscometer that has the flexibility of changing sensor rotors to accommodate a wide...
For fast and easy spot viscosity readings, look no further than the Malcom PCU-02V. This small and compact viscometer uses...
The Malcom DS-11 Dip Tester dual wave measurement system. Attain vital soldering performance information with just one device Features &...
The Malcom DS-11S Dip Tester for Selective Soldering measurement system. Attain vital soldering performance information with just one device. Features...