Malcom Wave & Selective Soldering: DS-10 Dip Tester

The Malcom DS-10 Dip Tester dual wave measurement system. Attain vital soldering performance information with just one device

Features & Benefits:

  • The self contained DS-10 rides along the conveyor like a PCB.
  • Measures the record's maximum PCB topside preheat temperature.
  • Confirms flux and solder levels.
  • Measures and records the maximum temperature and dwell times of both solder waves.
  • Programable temperature profiles make it possible to monitor 50ms sampling temperatures of the preheat & solder temperature sensors, in addition to the conventional management items.

Specifications

ITEMSPECIFICATION
Cold Contact Point CompensationAutomatic compensation w/ platinum temperature measuring resistor
Ambient Temperature5 min. or less is OK at ambient temperature of 150°C
Battery(1) Two (2) AAA batteries
Usable TimeMore than 10 continuous hours
Life of Sensor Mounting PlateMore than 5,000 times at soldering temperature of 250°C and dip time of 5 sec.
Outer Dimensions (mm)78 (W) x 214 (D) x 43.6 (H)
Weight820g (w/o battery)
MEASUREMENT DATA SPECIFICATIONS
ITEMSENSORDISPLAY METHODMEASUREMENT RANGEACCURACY / CONTENTS
Soldering TemperatureK Sheath
Thermocouple
Digital LCD 3-digit0 ~ 300°C± 1°C
Temperature on the
Topside of Board
K Tehermocouple50 ~ 300°C± 1°C
Dip TimeElectrode0 ~ 10.0 sec.± 0.2 sec.

* Specifications subject to change without notice.

Malcom Wave & Selective Soldering: Products