FT-3130 series constant stress/strain fatigue tester counts number of strokes until the test piece is broken.A test is done for 10 pieces at maximum of test pieces such as dumbbell shaped ones applied a certain dynamic load (constant stress mode) or dynamic strain (constant strain mode) at a preset frequency.
Rubber testing - Constant Stress/Strain Fatigue Tester (Series FT-3130) - Description
The FT-3130 series constant stress/strain fatigue tester applies dynamic stress or strain on test pieces and gives repeated tension at a fixed stroke to count number of strokes until the test piece is broken. It can test simultaneously on 10 of test pieces at maximum.
Load is monitored in constant strain mode, and tension is in constant stress on PC screen during a test
- Up to 10 test pieces can be tested simultaneously.
- It can detect breakage of each test piece and stop counting. When all the test pieces are broken, the machine will stop automatically.
- S-N curve (load vs count or tension vs count) can be displayed on PC screen during a test.
- Test results are saved in CSV files.
- It has a rotating handle convenient for setting test pieces on chucks.
|Applicable Standard||JIS K 6270、ISO6943（constant strain method）|
|Number of Test Pieces||10|
|Frequency||1 to 5 Hz|
|Stroke||5 to 60 mm|
|Upper Chuck Stroke||200 mm max.|
|Load||500N for each channel|
|Maximum number of strokes||999999 x 10 times or 9999h59m59s|
|Temperature||（1）RT+10 to 150°C (-40 to 150°C with optional refrigerator)|
（2）Controlled by a digital indicating controller
（3）Pt-100 sensor, PID control
|Chuck Movement||（1）Lower chuck by rotating handle|
（2）Upper chuck by PC control
（2）Test condition setup and input
（3）Display of test results
（4）Storage of test results
|Utility||Power supply 3-phs 200VAC 50/60Hz, 40A|
Compression air 0.5MPa (dry air)
※Optional refrigerator requires different power, air,
and cooling water.
|Dimensions and weight||（1）Dimensions approx. 1250(W) x 2250(H) x 820(D) mm|
（2）Weight approx. 1400 kg
※The above dimensions and weight are for the main unit only.
It does not include PC and options like refrigerator.