Features
The Poretech Bubble Point Tester is an equipment to measure the largest pore diameter of through pores of porous materials such as filter media, filter cartridges, non-wovens, membranes, separators, and others. It is automatically controlled and operated through computer software, and the test data will be automatically calculated and saved in the designated path location. The equipment is ideal for quality control purposes.
Specifications
| Model | BPT-A30 | BPT-A100 | BPT-A200 |
|---|---|---|---|
| Test Method | Gas-Liquid Displacement | ||
| Pressure Range | 30psi | 100psi | 200psi |
| Detectable Pore Diameter | 500μm-0.2μm | 200μm-0.06μm | 120-0.03μm |
| Expandable to 1000μm when adding additional function | |||
| Sample Size | Dia. 10mm to 45mm, Thickness up to 10mm (other size available) | ||
| Testing Liquid | Galwet, Silwet, IPA, Water, …any non corrosive liquid | ||
| Sample Geometry | Flat Sheets, Rods, Tubes, Hollow Fibers, Cartridges… | ||
| Pressure Control | Automatic | ||
| Pressure Regulator | Single | Single or Dual, Auto Switch | |
| Gas Flow Range | 0-100cc/min, 0-500cc/min or other by requirement | ||
| Flow Control | Automatic | ||
| Sample Chamber | SUS Standard Chamber | ||
| Data Transfer | External PC or Build-in Touch Panel Computer | ||
| Operation | Automatic Test Mode and Manual Operate Mode | ||
| Power | AC 100V-240V, 50/60Hz | ||
